国产国产人在线成免费视频

    <var id="tbxrt"><ins id="tbxrt"></ins></var>

        <big id="tbxrt"><listing id="tbxrt"></listing></big>
          <span id="tbxrt"><menuitem id="tbxrt"><dfn id="tbxrt"></dfn></menuitem></span>

          Shenzhen Grande Electronic Linkedin Page
          Shenzhen Grande Electronic Co., Ltd logo
          E-mail us for a Quote:
          sales88@greattong.com
          Call us now:
          +86-755-83261869

          Technical Article


          PCB Design: Design Limitations of Blind and Buried Vias

          Time:2017-04-17 15:28:51 Click:

          Three thermal press cycles are the maximum that is specified by Underwriters Laboratories. The previous example required two cycles: (1) layer lamination from 1/2 and 3/4 and (2) layer lamination from 1/2 and 3/4 to 5/6. 

          The minimum thickness of the core is 0.075 mm (0.003 inches). 

          Note: BBV layers require half ounce copper. In the through-hole plating process, each BBV layers receives 18 μm (0.0007 inches) of electrolytic copper. Hence, the complete copper thickness is 35μm (0.0014 inches). 

          For blind or buried via substrates, the minimum drill size is 0.2 mm (0.008 inches) with a maximum of 7:1 aspect ratio. 

          Note: Later lamination cycles will plug all BBV holes with epoxy. 

          After every lamination cycle, the ability to register drilled holes to inner layers is affected. 

          Annular Ring Minimum: Drilled prior to the first press cycle – 0.1 mm on each side
          Drilled subsequent to the first press cycle – 0.1 mm (0.004 inches) on each side
          Drilled subsequent to the second press cycle – 0.15 mm (0.006 inches) on each side
          Drilled subsequent to the third press cycle – 0.23 mm (0.009 inches) on each side

          All previous recommendation for multi-layer PCB design apply.  

          Information that must be on the board drawings: 
          Plated through-holes and BBV holes must be listed separately on the drawing’s hole chart.

          Previous:PCB Assembly:Design Decisions That Reduce Manufacturing Costs

          Next:Designed a Multilayer PCB Layout


          Request an Official Quote

          Questions

          E-MAIL

          File Upload

          Upload a list of files

            Please upload your Gerber files and BOM. You can upload an unlimited number of files as long as the total size of all files does not exceed 20 MB. To ensure you receive your official quote in less than 24 hours, please include the quantity of circuit boards for which you would like a quote.

            If you require that we sign a Non-Disclosure Agreement (NDA), please send it to us prior to sending your files and we will be happy to accommodate.

             
            Home About Us Services Quality Pb-Free News Contact Us


            Copyright ® 2017,Shenzhen Grande Electronic Co., Ltd. All Rights Reserved. 中文站 Sitemap

            国产国产人在线成免费视频

              <var id="tbxrt"><ins id="tbxrt"></ins></var>

                  <big id="tbxrt"><listing id="tbxrt"></listing></big>
                    <span id="tbxrt"><menuitem id="tbxrt"><dfn id="tbxrt"></dfn></menuitem></span>